The J-Man's Domain

A place to hang out and do stuff, I guess...
HomeHome  PortalPortal  CalendarCalendar  GalleryGallery  FAQFAQ  SearchSearch  RegisterRegister  MemberlistMemberlist  UsergroupsUsergroups  Log in  


 Pay attention to the casting structure design points

Go down 

Number of posts : 17
Registration date : 2013-10-30

Pay attention to the casting structure design points Empty
PostSubject: Pay attention to the casting structure design points   Pay attention to the casting structure design points Icon_minitimeWed Nov 13, 2013 10:05 pm

Castings,such as investment castings,aluminum casting,valve castings,and impeller casting,are widely used in many fields of modern society.Casting structure is the shape,cavity of the casting,and the connection between the wall thickness and the form of the reinforcement ribs and bosses.

Casting structure design should accord with the requirement of machine equipment itself and mechanical processing technic requirements,still should accord with the requirement of casting process, casting structure design should pay attention to the following:

1.easy to make model,core box and moulding :

1) the appearance of the casting should strive to simple,in order to draw,should try to make the casting parting surface flat,and the smallest number;

2) casting lumen need to not use or less use cores when casting,when using core, should be easy to support, fix and exhaust out of the sand,when necessary,should have enough technology hole;

3) for the casting internal and external profile and strengthening rib structure, should be in the same direction with a certain structure of slope;

4) convex parts and casting on the casting body should not differ too much,take the same height,the same distance on the surface of the close several convex sets,best even into the whole convex part

2.Reduce the tend of casting defects:

1) casting wall thickness should be uniform,in order to prevent the shrinkage,cracking,when need to ensure sequential solidification conditions,should try to make it in one direction change of wall thickness,when need to guarantee the solidification conditions at the same time,should try to make it with the thickness of broken walls;

2) casting wall and wall should be protected from sharp corners and connection between the metal concentration,thick wall and thin wall should be gradually transition,beware of mutation,so as not to cause heat and stress concentration, the formation of hot crack, shrinkage, etc;

3)partial thick section of casting should use hollow out or cast hole structure as far as possible,and appropriately strengthen rib reinforcement;

4) the hole of casting plane wall,should use convex edge reinforcement in order to reduce the wall thickness;

5) when colling the casting structure,it should shrink without resistance;

6) try to avoid a large water level in the casting;

7) waterways, interlining cavity of large area in casting, such as gas path should have some connection column.

3.ensure the casting has good formability,control the minimum wall thickness of casting not less than allowable value.

precision casting iron:
Back to top Go down
View user profile
Pay attention to the casting structure design points
Back to top 
Page 1 of 1
 Similar topics
» Weight watcher points needed
» Young Design Team Call
» Hand built points
» Design Board
» Nova d57200

Permissions in this forum:You cannot reply to topics in this forum
The J-Man's Domain :: RP Forum-
Jump to: