Share the Maintenance of Raymond Grinding Mill

Raymond mill is widely used in the field of metallurgy, building materials, chemical industry and mining to process powder. Raymond Mill is used in grinding materials with Moh’s hardness below 7, humidity less than 6%, such as gypsum, talc, calcite, limestone, marble, feldspar, barite, dolomite, granite, kaolin, bentonite, bauxite, iron ore etc., the final products change from 0.613-0.044mm. Through the function of powder separator and blower, Raymond grinding Mill can meet different customers’ demands. The whole system of Raymond mill consists of main frame, separator, blower, piping device, electromagnetic vibrating feeder, electric control panel, etc.

When Raymond grinder is not working, it is necessary for scientific storage. In the process of storing Raymond mill needs to consider the location of the device and maintenance work. In this article, Hongxing experts explain maintenance work on Raymond mill standby.




Before placing Raymond grinder mill, we must do the work of cleaning and rust-prevention, and select the appropriate place to store.Great Wall recommend users to store Raymond grinding machine indoors, and keep dry. The indoors that have stored Raymond grinding mill should be orderly , smooth , uniform and independent between the objects. If some users can not find a suitable indoor to store Raymond grinder, it can only be placed on the outside. Requirements that outdoor should have flat ground and covered with wood and then to place the mill. When storing Raymond mill, it is necessary to pay attention to mechanical fuel control, once reduced speed,it is necessary to maintain the operating lever in the neutral position.

During the shutdown storage, maintenance of the device can not ignore the engine and make sure treatment once a month as far as possible during the stop. Requires the user to be noted that during the storage Raymond mill , be sure to remove the battery to ensure it clean and dry , and be stored in a dry place. When using the battery again, it needs to connect the positive and negative wire to avoid short circuit.If it is the lead-acid batteries,it needs to charge once a month.

high strength mill: http://www.sell-crusher.com/pro/p38.html